SEAM SEALING MACHINE WITH FIXED BOTTOM COLUMN

The machine is complete with:

• motorized rollers with independent speed and differential effect
• nozzle adjustable on 3 axis position
• 25 mm motorized upper roller for 22 mm tape
• 25 mm motorized bottom roller for 22 mm tape
• possibility to select hot guide for tape (no tape cutter)
• possibility to select cold guide and front cutter
• adapted to be fitted with electronic metering device 902.01
• adapted to be fitted with tape pre-lamination device 903.01
• tape spool support
• lighting lamp for working station.
• colour Touch Screen for parameter setting

FINISHING OF TROUSERS WITHOUT PLEATS

Electro-pneumatic unit for the finishing of trouser without pleats, suitable for the application of top and legs sizing device. Possibility of front flap and front pocket pressing. The unit is complete with:

• color device TC W7" with USD and Wi-Fi
• four steaming and blowing stations fitted on rotating plate
• shaped medium size plate for top.

The tension is released on the trouser top sides. Standard shape fitted on the machine (pls see below for other available shapes on request)

• trouser tensioning device by mechanical adjustment for pressing both babies short and large size men’s trousers (possibility of legs sizing changing loading position)
• pneumatic adjustment for legs and tops tensioning by a sensor for position locking
• adjustable steaming flow
• device to adjust air blowing flow
• front flap blocking device and rear belt
• adjustable and tilting legs clamps
• steam over-heater
• air blowing by electric fan (Kw. 2,25)
• air/blowing heating
• adjustable clamps pressure
• electronic time set-up for steaming, air blowing delay, air blowing and anticipated clamps opening
• production counter

Electropneumatic machine for SIMULTANEOUS PRESSING OF BODY, YOKE AND SHOULDERS OF SHIRTS, complete with:

• two dummies with vacuum, movable upper side (shoulders and yoke) and side adjustment by pneumatic inflatable bags
• electrically heated plates
• electronic temperature control with independent adjustment between front and back plates
• adjustable separate pressing pressures for body, shoulders and inflatable bags
• manual water spraying gun
• built-in vacuum unit of 3 Kw, with silenced exhaust
• safety guard device - programmer TCW color terminal for the programming of 7" with USB and Wi-Fi, for the following functions:
  - body pressing
  - shoulder pressing
  - inflatable bags control
  - water spraying control (when foreseen)
  - production counter

Continuous module-type tunnel for garments finishing. In function of its composition and the type of work to do, it can produce from 500 to 800 pieces per hour. the tunnel is composed and complete with:

• an automatic right load station for single garments complete with gamrents lack signal; and an unload station
• variable-speed chain conveyor (controlled by an inverter) with hooks spaced out at 317 mm. intervals
• one steaming chamber
• one variable-temperature ventilation chamber and variable capacity through inverter
• steaming quantity regulation
• steaming humidity adjustment
• garments falling signal
• pillows for steam containment in the steaming chamber
• programming and regulation with TCW "7 programmer:
  - short or long garments with independent control low steaming
  - continuous or alternate garments loading
  - variable and programmable garments transport speed
  - partial and totalizer garment counter
  - variable extractor for extra steam canalization (inverter)
  - registration up to 99 programs

SEAM SEALING MACHINE WITH FIXED BOTTOM COLUMN

The machine is complete with:

• motorized rollers with independent speed and differential effect
• nozzle adjustable on 3 axis position
• 25 mm motorized upper roller for 22 mm tape
• 25 mm motorized bottom roller for 22 mm tape
• possibility to select hot guide for tape (no tape cutter)
• possibility to select cold guide and front cutter
• adapted to be fitted with electronic metering device 902.01
• adapted to be fitted with tape pre-lamination device 903.01
• tape spool support
• lighting lamp for working station.
• colour Touch Screen for parameter setting

FINISHING OF TROUSERS WITHOUT PLEATS

Electro-pneumatic unit for the finishing of trouser without pleats, suitable for the application of top and legs sizing device. Possibility of front flap and front pocket pressing. The unit is complete with:

• color device TC W7" with USD and Wi-Fi
• four steaming and blowing stations fitted on rotating plate
• shaped medium size plate for top.

The tension is released on the trouser top sides. Standard shape fitted on the machine (pls see below for other available shapes on request)

• trouser tensioning device by mechanical adjustment for pressing both babies short and large size men’s trousers (possibility of legs sizing changing loading position)
• pneumatic adjustment for legs and tops tensioning by a sensor for position locking
• adjustable steaming flow
• device to adjust air blowing flow
• front flap blocking device and rear belt
• adjustable and tilting legs clamps
• steam over-heater
• air blowing by electric fan (Kw. 2,25)
• air/blowing heating
• adjustable clamps pressure
• electronic time set-up for steaming, air blowing delay, air blowing and anticipated clamps opening
• production counter

Electropneumatic machine for SIMULTANEOUS PRESSING OF BODY, YOKE AND SHOULDERS OF SHIRTS, complete with:

• two dummies with vacuum, movable upper side (shoulders and yoke) and side adjustment by pneumatic inflatable bags
• electrically heated plates
• electronic temperature control with independent adjustment between front and back plates
• adjustable separate pressing pressures for body, shoulders and inflatable bags
• manual water spraying gun
• built-in vacuum unit of 3 Kw, with silenced exhaust
• safety guard device - programmer TCW color terminal for the programming of 7" with USB and Wi-Fi, for the following functions:
  - body pressing
  - shoulder pressing
  - inflatable bags control
  - water spraying control (when foreseen)
  - production counter