SEAM SEALING MACHINE WITH FIXED BOTTOM COLUMN

The machine is complete with:

• motorized rollers with independent speed and differential effect
• nozzle adjustable on 3 axis position
• 25 mm motorized upper roller for 22 mm tape
• 25 mm motorized bottom roller for 22 mm tape
• possibility to select hot guide for tape (no tape cutter)
• possibility to select cold guide and front cutter
• adapted to be fitted with electronic metering device 902.01
• adapted to be fitted with tape pre-lamination device 903.01
• tape spool support
• lighting lamp for working station.
• colour Touch Screen for parameter setting

FINISHING OF TROUSERS WITHOUT PLEATS

Electro-pneumatic unit for the finishing of trouser without pleats, suitable for the application of top and legs sizing device. Possibility of front flap and front pocket pressing. The unit is complete with:

• color device TC W7" with USD and Wi-Fi
• four steaming and blowing stations fitted on rotating plate
• shaped medium size plate for top.

The tension is released on the trouser top sides. Standard shape fitted on the machine (pls see below for other available shapes on request)

• trouser tensioning device by mechanical adjustment for pressing both babies short and large size men’s trousers (possibility of legs sizing changing loading position)
• pneumatic adjustment for legs and tops tensioning by a sensor for position locking
• adjustable steaming flow
• device to adjust air blowing flow
• front flap blocking device and rear belt
• adjustable and tilting legs clamps
• steam over-heater
• air blowing by electric fan (Kw. 2,25)
• air/blowing heating
• adjustable clamps pressure
• electronic time set-up for steaming, air blowing delay, air blowing and anticipated clamps opening
• production counter

Electropneumatic machine for SIMULTANEOUS PRESSING OF BODY, YOKE AND SHOULDERS OF SHIRTS, complete with:

• two dummies with vacuum, movable upper side (shoulders and yoke) and side adjustment by pneumatic inflatable bags
• electrically heated plates
• electronic temperature control with independent adjustment between front and back plates
• adjustable separate pressing pressures for body, shoulders and inflatable bags
• manual water spraying gun
• built-in vacuum unit of 3 Kw, with silenced exhaust
• safety guard device - programmer TCW color terminal for the programming of 7" with USB and Wi-Fi, for the following functions:
  - body pressing
  - shoulder pressing
  - inflatable bags control
  - water spraying control (when foreseen)
  - production counter

CONTINUOUS BELT FUSING MACHINE, split in the following sections:

• cold loading belt with inverter control
• length 1100 mm
• fusing heated area with no.2 cylinders drive
• length 1000 mm
• unloading belt with inverter control
• lenght 1060 mm
• the machine is already adapted to be connected with the automatic loader Mod. 985 and unloader Mod. 978
• useful working area: 1000 mm
• 7" color terminal TCW for parameters setting complete with USB port and Wi-Fi connection. It is also adapted to control by video the loding and unloding devices
• automatic switch off
• fusing pressure from 0 to 6 Ate with 2 cylinders
• programmable belt speed from 2 to 10 mt/min and controlled by inverter
• no.2 programmable temperature controls
• automatic light signal of "machine ready" or any eventual malfunctioning
• four belts cleaning devices, two inner and two outer
• detachment of fused fabric by carbon blade

HEATING The machine heating is by steam only. The max. temperature which can be achieved on the fabric is 10°C lower than the steam nominal temperature

SEAM SEALING MACHINE WITH FIXED BOTTOM COLUMN

The machine is complete with:

• motorized rollers with independent speed and differential effect
• nozzle adjustable on 3 axis position
• 25 mm motorized upper roller for 22 mm tape
• 25 mm motorized bottom roller for 22 mm tape
• possibility to select hot guide for tape (no tape cutter)
• possibility to select cold guide and front cutter
• adapted to be fitted with electronic metering device 902.01
• adapted to be fitted with tape pre-lamination device 903.01
• tape spool support
• lighting lamp for working station.
• colour Touch Screen for parameter setting

FINISHING OF TROUSERS WITHOUT PLEATS

Electro-pneumatic unit for the finishing of trouser without pleats, suitable for the application of top and legs sizing device. Possibility of front flap and front pocket pressing. The unit is complete with:

• color device TC W7" with USD and Wi-Fi
• four steaming and blowing stations fitted on rotating plate
• shaped medium size plate for top.

The tension is released on the trouser top sides. Standard shape fitted on the machine (pls see below for other available shapes on request)

• trouser tensioning device by mechanical adjustment for pressing both babies short and large size men’s trousers (possibility of legs sizing changing loading position)
• pneumatic adjustment for legs and tops tensioning by a sensor for position locking
• adjustable steaming flow
• device to adjust air blowing flow
• front flap blocking device and rear belt
• adjustable and tilting legs clamps
• steam over-heater
• air blowing by electric fan (Kw. 2,25)
• air/blowing heating
• adjustable clamps pressure
• electronic time set-up for steaming, air blowing delay, air blowing and anticipated clamps opening
• production counter

Electropneumatic machine for SIMULTANEOUS PRESSING OF BODY, YOKE AND SHOULDERS OF SHIRTS, complete with:

• two dummies with vacuum, movable upper side (shoulders and yoke) and side adjustment by pneumatic inflatable bags
• electrically heated plates
• electronic temperature control with independent adjustment between front and back plates
• adjustable separate pressing pressures for body, shoulders and inflatable bags
• manual water spraying gun
• built-in vacuum unit of 3 Kw, with silenced exhaust
• safety guard device - programmer TCW color terminal for the programming of 7" with USB and Wi-Fi, for the following functions:
  - body pressing
  - shoulder pressing
  - inflatable bags control
  - water spraying control (when foreseen)
  - production counter